Cover Image

Effect of thrust reverser operation on the lateral-directional characteristics of a three-surface F-15 model at transonic speeds/

Main Author:	Bare, E. Ann
Corporate Authors:	United States National Aeronautics and Space Administration Scientific and Technical Information Branch, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, Langley Research Center
Other Authors:	Pendergraft, Odis C.
Format:	Book
Language:	English
Published:	Washington: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1983
Series:	NASA technical paper 2234
Subjects:	Jet planes > Thrust reversers

Similar Items

Effect of simulated in-flight thrust reversing on vertical-tail loads of F-18 and F-15 airplane models/
by: Bare, E. Ann
Published: (1981)

Static internal performance characteristics of two thrust-reverser concepts for axisymmetric nozzles/
by: Leavitt, Laurence D.
Published: (1982)

Aerodynamics in ground effect and predicted landing ground roll of a fighter configuration with a secondary-nozzle thrust reverser/
by: Banks, Daniel W.
Published: (1988)

Effect of port corner geometry on the internal performance of a rotating-vane-type thrust reverser/
by: Berrier, Bobby L.
Published: (1986)

Static internal performance of a nonaxisymmetric vaned thrust reverser with flow splay capability/
by: Bangert, Linda S.
Published: (1989)

Performance of twin-dimensional wedge nozzles including thrust vectoring and reversing effects at speeds up to Mach 2.20/
by: Capone, Francis J.
Published: (1977)

Static internal performance including thrust vectoring and reversing of tow-dimensional convergent-divergent nozzles/
by: Re, Richard J.
Published: (1984)

Effect of nozzle and vertical-tail variables on the performance of a three-surface F-15 model at transonic Mach numbers
by: Pendergraft, Odis C.
Published: (1982)

Static internal performance of a thrust vectoring and reversing two-dimensional convergent-divergent nozzle with an aft flap/
by: Re, Richard J.
Published: (1986)

Flight evaluation of a simplified gross thrust calculation technique using an F100 turbofan engine in an F-15 airplane/
by: Kurtenbach, Frank J.
Published: (1981)

Minimum-fuel, three-dimensional flightpath guidance of transport jets/
by: Neuman, Frank
Published: (1984)

Effect of slotted casing treatment with change in Reynolds number index on performance of a jet engine/
by: Moss, John E.
Published: (1977)

Reverse engineering
by: Bell, Walter.
Published: (2007)

The effect of forward speed on J85 engine noise from suppressor nozzles as measured in the NASA-Ames 40- by 80-foot wind tunnel/
by: Atencio, Adolph
Published: (1977)

Reversing secrets of reverse engineering /
by: Eilam, Eldad.
Published: (2005)

Flight comparison of the transonic agility of the F-111A airplane and the F-111 supercritical wing airplane/
by: Friend, Edward L.
Published: (1978)

Northrop F-5 case study in aircraft design
Published: (1978)

Reverse mathematics 2001/
Published: (2005)

Introduction to reversible computing /
by: Perumalla, Kalyan S. 1968-

Practical reverse engineering : x86, x64, ARM, Windows Kernel, reversing tools, and obfuscation /
by: Dang, Bruce.

Data reverse engineering : slaying the legacy dragon /
by: Aiken, Peter H.
Published: (1996)

Reverse engineering and software maintenance: a practical approach/
by: Lano, Kevin
Published: (1994)

Simulator study of stall/post-stall characteristics of a fighter airplane with longitudinal static stability/
Published: (1979)

Aeropropulsive characteristics of nonaxisymmetric-nozzle thrust reversers at Mach numbers from 0 to 1.20/
by: Carson, George T.
Published: (1984)

Reverse engineering /
by: Ingle, Kathryn A
Published: (1994)

The application of parameter estimation to flight measurements to obtain lateral-directional stability derivatives of an augmented jet-flap STOL airplane/
by: Stephenson, Jack D. 1922-
Published: (1983)

Emplacement mechanisms of nappes and thrust sheets/
by: Merle, Olivier
Published: (1998)

Static internal performance of a two-dimensional convergent-divergent nozzle with thrust vectoring/
by: Bare, E. Ann
Published: (1987)

Toxicologic assessment of jet-propulsion fuel 8
Published: (2003)

Training therapists for tongue thrust correction
by: Ehrlich, Ann B
Published: (1970)

Reverse engineering : an industrial perspective /
Published: (2008)

Use of constrained optimization in the conceptual design of a medium-range subsonic transport/
by: Sliwa, Steven M.
Published: (1980)

Comparative in-flight thrust measurements of the SERT II ion thruster/
by: Nieberding, William C.
Published: (1970)

Comparison of jet mach number decay data with a correlation and jet spreading contours for a large variety of nozzles/
by: Groesbeck, Donald E.
Published: (1977)

Velocity field of a round jet in a cross flow for various jet injection angles and velocity ratios/
by: Fearn, Richard L.
Published: (1979)

Application of second-order turbulent modeling to the prediction of radiated aerodynamic sound/
by: Bilanin, Alan J.
Published: (1978)

Cumulative annoyance due to multiple aircraft flyovers with differing peak noise levels/
by: Shepherd, Kevin P.
Published: (1981)

A forebody design technique for highly integrated botton-mounted scramjets with application to a hypersonic research airplane/
by: Edwards, C. L. W.
Published: (1976)

Turbulence measurements in supersonic, shock-free jets by the optical crossed-beam method/
by: Fischer, M. J.
Published: (1970)

Mean velocity, turbulence intensity, and scale in a subsonic turbulent jet impinging normal to a large flat plate/
by: Boldman, Donald R.
Published: (1977)

Cannot write session to /tmp/vufind_sessions/sess_ijdkmajjf7bqgfrl2qtkh2kod6