Cover Image

Effect of coolant flow ejection on aerodynamic performance of low-aspect-ration vanes/

Main Author:	Haas, Jeffrey E.
Corporate Authors:	United States National Aeronautics and Space Administration Scientific and Technical Information Office, Lewis Research Center, United States. National Aeronautics and Space Administration., Scientific and Technical Information Office
Other Authors:	Kofskey, Milton G.
Format:	Book
Language:	English
Published:	Washington: NASA Scientific and technical Information Branch, 1976-1977
Series:	NASA technical paper 1057
Subjects:	Turbines > Blades > Cooling Turbines > Aerodynamics Turbomachines > Performance

Similar Items

Effect of cooling-hole geometry on aerodynamic performance of a film-cooled turbine van tested with cold air in a two-dimensional cascade/
by: Kline, John F.
Published: (1978)

FORTRAN program for calculating coolant flow and metal temperatures of a full-coverage-film-cooled vane or blade/
by: Meitner, Peter L.
Published: (1978)

Prediction method for two-dimensional aerodynamic losses of cooled vanes using integral boundary-layer parameters/
by: Goldman, Louis J.
Published: (1980)

Experimental flow coefficients of a full-coverage film-cooled-vane chamber/
by: Meitner, Peter L.
Published: (1977)

Experimental performance and analysis of 15.04-centimeter-tip-diameter, radial-inflow turbine with work factor of 1.126 and thick blading/
by: McLallin, Kerry L.
Published: (1980)

Two-dimensional cold-air cascade study of a film-cooled turbine stator blade/
by: Prust, Herman W.
Published: (1978)

Flow measurement in base cooling air passages of a rotating turbine blade/
by: Liebert, Curt H.
Published: (1974)

Cooled-turbine aerodynamic performance prediction from reduced primary to coolant total-temperature-ratio results/
by: Goldman, Louis J.
Published: (1976)

Aerodynamic performances of three fan stator designs operating with rotor having tip speed of 337 meters per second and pressure ratio of 1.54/
by: Gelder, Thomas F.
Published: (1980)

Gas turbine ceramic-coated-vane concept with convection-cooled porus metal core/
Published: (1981)

Aerodynamics of wind turbines/
by: Hansen, Martin O. L.
Published: (2008)

Off-design performance loss model for radial turbines with pivoting, variable-area stators/
by: Meitner, Peter L.
Published: (1980)

Flow visualization of discrete-hole film cooling with a spawnwise injection over a cylinder/
by: Russell, Louis M.
Published: (1979)

Aerodynamics of turbines and compressors/
by: Hawthorne, William R.
Published: (1964)

Improved method for calculating transonic velocities on blade-to-blade stream surfaces of a turbomachine/
by: Wood, Jerry R.
Published: (1981)

Aerodynamics of wind turbines /
by: Hansen, Martin O. L.
Published: (2008)

Effect of free-stream turbulence on film cooling/
by: Marek, Cecil J.
Published: (1975)

Aerodynamic performance of axial-flow fan stage operated at nine inlet guide vane angles/
by: Moore, Royce D.
Published: (1979)

Surface pyrometry in presence of radiation from other sources with application to turbine-blade temperature measurement/
by: Buchele, Donald R.
Published: (1980)

Comparison of elastic and elastic-plastic structural analyses for cooled turbine blade foils/
by: Kaufman, Albert, 1928-
Published: (1980)

Review and status of liquid-cooling technology for gas turbines/
by: Van Fossen, G. James
Published: (1979)

Historical development of the windmill/
by: Shepherd, Dennis G.
Published: (1990)

Effects of film injection angle on turbine vane cooling/
by: Gauntner, James W.
Published: (1977)

Cold-air performance of a 12.766-centimeter-tip axial-flow cooled turbine/
by: Haas, Jeffrey E.
Published: (1977)

Blade row interference effects in axial turbomachinery stages : February 9 - 12, 1998 /
Published: (1998)

Heat transfer and cooling in gas turbine : [lectures held at] von Karman Institute for Fluid Dynamics B-1640 Rhode Saint Genese - Belgium, May 8-12, 1995 /
Published: (1995)

Protective coatings for turbine blades
by: Tamarin, Y.
Published: (2002)

Cold-air investigation of 4 1/2-stage turbine with stage-loading factor of 4.66 and high specific work output : II - stage group performance /
Published: (1980)

Cold-air investigation of first state of 4 1/2-stage, fan-drive turbine with average stage-loading factor of 4.66/
by: Whitney, Warren J.
Published: (1981)

Method for calculating convective heat-tranfer coeffecients over turbine vane surfaces/
by: Gauntner, Daniel J.
Published: (1978)

Design and recalculation of wind turbine rotor blades/
by: Cristiaens, Benjamin
Published: (2012)

Flow field investigation of a horizontal axis wind turbine /
by: Dimitriadis, Emmanouil
Published: (2012)

Analysis of uncertainities in turbine metal temperature predictions/
by: Stepka, Francis S.
Published: (1980)

Aerodynamic performance of a 1.35-pressure-ratio axial-flow fan stage/
by: Osborn, Walter M.
Published: (1978)

Nonlinear, three-dimensional finite-element analysis of air-cooled gas turbine blades/
by: Kaufman, Albert, 1928-
Published: (1980)

Performance of a vortex-controlled diffuser in an annular swirl-can combustor at inlet mach numbers up to 0.53/
by: Smith, John M. 1922-
Published: (1979)

Computer code for predicting coolant flow and heat transfer in turbomachinery/
by: Meitner, Peter L.
Published: (1990)

Aerodynamic performance of 1.38-pressure-ratio, variable-pitch fan stage/
by: Moore, Royce D.
Published: (1979)

Analytic investigation of effect of end-wall contouring on stator performance/
by: Boyle, Robert J.
Published: (1981)

Flow visualization of film cooling with spanwise injection from a small array of holes and compound-angle injection from a large array/
by: Russell, Louis M.
Published: (1978)

Cannot write session to /tmp/vufind_sessions/sess_jf0lhnj2mah68bsscm9f7vbe73