Cover Image

Internal performance of two nozzles utilizing gimbal concepts for thrust vectoring/

Main Author:	Berrier, Bobby L.
Corporate Authors:	United States National Aeronautics and Space Administration Scientific and Technical Information Division, United States. National Aeronautics and Space Administration. Scientific and Technical Information Division, Langley Research Center
Other Authors:	Taylor, John G.
Format:	Book
Language:	English
Published:	Washington: National Aeronautics and Space Administration, Scientific and Technical Information Division, 1990
Series:	NASA technical paper 2991
Subjects:	Jet nozzles > Testing Airplanes > Jet propulsion

Similar Items

Static internal performance of a two-dimensional convergent-divergent nozzle with thrust vectoring/
by: Bare, E. Ann
Published: (1987)

Aeropropulsive characteristics of canted twin pitch-vectoring nozzles at Mach 0.20 to 1.20/
by: Capone, Francis J.
Published: (1991)

Venturi nozzle effects on fuel drop size and nitrogen oxide emissions/
by: Johnson, Susan M. 1952-
Published: (1982)

Crossflow in two-dimensional asymmetric nozzles/
by: Sebacher, Daniel I.
Published: (1975)

Operation and performance measurement on engines in sea level test facilities
Published: (1984)

Effect of several geometric parameters on the static internal performance of three nonaxisymmetric nozzle concepts/
by: Berrier, Bobby L.
Published: (1979)

Performance of twin-dimensional wedge nozzles including thrust vectoring and reversing effects at speeds up to Mach 2.20/
by: Capone, Francis J.
Published: (1977)

Aeropropulsive characteristics of nonaxisymmetric-nozzle thrust reversers at Mach numbers from 0 to 1.20/
by: Carson, George T.
Published: (1984)

Effect of a trade between boattail angle and wedge size on the performance of a nonaxisymmetric wedge nozzle/
by: Carson, George T.
Published: (1987)

Static investigation of a two-dimensional convergent-divergent exhaust nozzle with multiaxis thrust-vectoring capability/
by: Taylor, John G.
Published: (1990)

Static and wind-on tests of an upper-surface-blown jet-flap nozzle arrangement for use on the Quiet Clean Shore-haul Experimental Engine (QCSEE)/
by: Phelps, Arthur E.
Published: (1977)

Experimental and analytical investigation of a nonaxisymmetric and wedge nozzle at static conditions/
by: Carson, George T.
Published: (1978)

Hot-flow tests of a series of 10-percent-scale turbofan forced mixing nozzles/
by: Head, Verlon L.
Published: (1984)

Performance of an isolated two-dimensional variable-geometry wedge nozzle with translating shroud and collapsing wedge at speeds up to mach 2.01/
by: Maiden, Donald L.
Published: (1975)

Effects of nozzle interfairing modifications on longitudinal aerodynamic characteristics of a twin-jet, variable-wing-sweep fighter model/
by: Reubush, David E.
Published: (1975)

Static investigation of two STOL nozzle concepts with pitch thrust-vectoring capability/
by: Mason, Mary L.
Published: (1986)

Parametric experimental investigation of a scramjet nozzle at Mach 6 with freon and argon or air used for exhaust simulation/
by: Cubbage, James M.
Published: (1991)

Aeropulsive characteristics at Mach numbers up to 2.2 of axisymmetric and nonaxisymmetric nozzles installed on an F-18 model/
by: Capone, Francis J.
Published: (1982)

The effects on propulsion-induced aerodynamic forces of vectoring a partial-span rectangular jet at mach numbers from 0.40 to 1.20/
by: Capone, Francis J.
Published: (1975)

Effects of sidewall geometry on the installed performance of nonaxisymmetric convergent-divergent exhaust nozzles/
by: Yetter, Jeffery A.
Published: (1980)

Static internal performance of a thrust vectoring and reversing two-dimensional convergent-divergent nozzle with an aft flap/
by: Re, Richard J.
Published: (1986)

Effect of nozzle and vertical-tail variables on the performance of a three-surface F-15 model at transonic Mach numbers
by: Pendergraft, Odis C.
Published: (1982)

Static internal performance characteristics of two thrust-reverser concepts for axisymmetric nozzles/
by: Leavitt, Laurence D.
Published: (1982)

Boundary-layer separation on isolated boattail nozzles/
by: Abeyounis, William Kelly
Published: (1978)

Optimizing jet transport efficiency : performance, operations, and economics /
by: Padilla, Carlos E.
Published: (1996)

Aeronautical propulsion : the proceedings of a conference held at Lewis Research Center in Cleveland, Ohio, on May 13 and 14, 1975 /
Published: (1975)

Jet aircraft power systems/
by: Casamassa, Jack V.
Published: (1965)

Experimental investigation of a 0.15-scale model of an underfuselage normal-shock inlet/
by: Leamer, P. C.
Published: (1978)

Aerospace propulsion /
by: Lee, T.-W.

Static internal performance including thrust vectoring and reversing of tow-dimensional convergent-divergent nozzles/
by: Re, Richard J.
Published: (1984)

Jet engines : fundamentals of theory, design and operation /
by: Hunecke, Klause
Published: (1997)

Aerodynamic and directional acoustic performance of a scoop inlet/
by: Abbott, John M.
Published: (1977)

Aircraft propulsion /
by: Farokhi, Saeed,

Static and wind tunnel near-field/far-field jet noise measurements from model scale single-flow baseline and suppressor nozzles
by: Jaeck, Carl L.
Published: (1977)

Static investigation of several yaw vectoring concepts on nonaxisymmetric nozzles/
by: Mason, Mary L.
Published: (1985)

ALtitude calibration of an F100, S/N P680063, turbofan engine/
by: Biesiadny, Thomas J.
Published: (1978)

Exploratory study of transient unstart phenomena in a three-dimensional fixed-geometry scramjet engine/
by: Wieting, Allan R.
Published: (1976)

Jet, rocket, nuclear, ion and electric propulsion: theory and design/
by: Loh, Wellington Hsiao-Tung, 1917-
Published: (1968)

Introduction to aerospace propulsion /
by: Archer, R. Douglas.
Published: (1996)

Experimental evaluation of a spinning-mode acoustic-treatment design concept for aircraft inlets/
by: Heidelberg, Laurence J.
Published: (1980)

Cannot write session to /tmp/vufind_sessions/sess_gec179vbdv3cbfs1han5kbi6c4