Cover Image

Experimental and analytical investigation of a nonaxisymmetric and wedge nozzle at static conditions/

Main Author:	Carson, George T.
Corporate Authors:	United States National Aeronautics and Space Administration Scientific and Technical Information Office, United States. National Aeronautics and Space Administration. Scientific and Technical Information Office, Langley Research Center
Other Authors:	Mason, Mary L.
Format:	Book
Language:	English
Published:	Washington: National Aeronautics and Space Administration, Scientific and Technical Information Office, 1978
Series:	NASA technical paper 1188
Subjects:	Jet nozzles

Similar Items

Effect of a trade between boattail angle and wedge size on the performance of a nonaxisymmetric wedge nozzle/
by: Carson, George T.
Published: (1987)

Aeropropulsive characteristics of nonaxisymmetric-nozzle thrust reversers at Mach numbers from 0 to 1.20/
by: Carson, George T.
Published: (1984)

Aeropulsive characteristics at Mach numbers up to 2.2 of axisymmetric and nonaxisymmetric nozzles installed on an F-18 model/
by: Capone, Francis J.
Published: (1982)

Parametric experimental investigation of a scramjet nozzle at Mach 6 with freon and argon or air used for exhaust simulation/
by: Cubbage, James M.
Published: (1991)

Experimental investigation of two nonaxisymmetric wedge nozzles at free-stream Mach numbers up to 1.20/
by: Mason, Mary L.
Published: (1982)

Effects of sidewall geometry on the installed performance of nonaxisymmetric convergent-divergent exhaust nozzles/
by: Yetter, Jeffery A.
Published: (1980)

Static internal performance of a two-dimensional convergent-divergent nozzle with thrust vectoring/
by: Bare, E. Ann
Published: (1987)

Static investigation of several yaw vectoring concepts on nonaxisymmetric nozzles/
by: Mason, Mary L.
Published: (1985)

Numerical method for predicting flow characteristics and performance of nonaxisymmetric nozzles : theory /
by: Thomas, P. D. 1935-
Published: (1979)

Crossflow in two-dimensional asymmetric nozzles/
by: Sebacher, Daniel I.
Published: (1975)

Static performance of nonaxisymmetric nozzles with yaw thrust-vectoring vanes/
by: Mason, Mary L.
Published: (1988)

Performance of an isolated two-dimensional variable-geometry wedge nozzle with translating shroud and collapsing wedge at speeds up to mach 2.01/
by: Maiden, Donald L.
Published: (1975)

Effect of several geometric parameters on the static internal performance of three nonaxisymmetric nozzle concepts/
by: Berrier, Bobby L.
Published: (1979)

Performance of twin-dimensional wedge nozzles including thrust vectoring and reversing effects at speeds up to Mach 2.20/
by: Capone, Francis J.
Published: (1977)

Static investigation of a two-dimensional convergent-divergent exhaust nozzle with multiaxis thrust-vectoring capability/
by: Taylor, John G.
Published: (1990)

Static and wind tunnel near-field/far-field jet noise measurements from model scale single-flow baseline and suppressor nozzles
by: Jaeck, Carl L.
Published: (1977)

Aeropropulsive characteristics of isolated combined turbojet/ramjet nozzles at Mach numbers from 0 to 1.20/
by: Carson, George T.
Published: (1988)

Statis performance of five twin-engine nonaxisymmetric nozzles with vectoring and reversing capability/
by: Capone, Francis J.
Published: (1978)

Internal performance of two nozzles utilizing gimbal concepts for thrust vectoring/
by: Berrier, Bobby L.
Published: (1990)

Experimental and analytical investigation of axisymmetric supersonic cruise nozzle geometry at Mach numbers form 0.60 to 1.30/
by: Carson, George T.
Published: (1981)

Static and wind-on tests of an upper-surface-blown jet-flap nozzle arrangement for use on the Quiet Clean Shore-haul Experimental Engine (QCSEE)/
by: Phelps, Arthur E.
Published: (1977)

Static internal performance including thrust vectoring and reversing of tow-dimensional convergent-divergent nozzles/
by: Re, Richard J.
Published: (1984)

Effects of nozzle interfairing modifications on longitudinal aerodynamic characteristics of a twin-jet, variable-wing-sweep fighter model/
by: Reubush, David E.
Published: (1975)

Aeropropulsive characteristics of canted twin pitch-vectoring nozzles at Mach 0.20 to 1.20/
by: Capone, Francis J.
Published: (1991)

Static investigation of two STOL nozzle concepts with pitch thrust-vectoring capability/
by: Mason, Mary L.
Published: (1986)

Static investigation of circular-to-rectangular transition ducts for high-aspect-ratio nonaxisymmetric nozzles/
by: Burley, James R.
Published: (1986)

Effect of tail size reductions on longitudinal aerodynamic characteristics of a three-surface F-15 model with nonaxisymmetric nozzles/
by: Frassinelli, Mark C.
Published: (1990)

Boundary-layer separation on isolated boattail nozzles/
by: Abeyounis, William Kelly
Published: (1978)

Experimental and numerical investigation of boundary-layer development and transition on the walls of a Mach 5 nozzle/
by: Harvey, William D., 1934-
Published: (1975)

Static internal performance of a thrust vectoring and reversing two-dimensional convergent-divergent nozzle with an aft flap/
by: Re, Richard J.
Published: (1986)

Venturi nozzle effects on fuel drop size and nitrogen oxide emissions/
by: Johnson, Susan M. 1952-
Published: (1982)

Effect of nozzle and vertical-tail variables on the performance of a three-surface F-15 model at transonic Mach numbers
by: Pendergraft, Odis C.
Published: (1982)

Hot-flow tests of a series of 10-percent-scale turbofan forced mixing nozzles/
by: Head, Verlon L.
Published: (1984)

A finite-difference analysis of the nozzle starting process in an expansion tunnel/
by: Weilmuenster, K. James
Published: (1975)

Experimental thrust performance of a high-area-ratio rocket nozzle/
by: Pavli, Albert J.
Published: (1987)

Performance of an isolated two-dimensional wedge nozzel with fixed cowl and variable wedge centerbody at Mach numbers up to 2.01/
by: Maiden, Donald L.
Published: (1976)

Investigation of convergent-divergent nozzles applicable to reduced-power supersonic cruise aircraft/
by: Berrier, Bobby L.
Published: (1980)

Performance characteristics of axisymmetric convergent-divergent exhaust nozzles with longitudinal slots in the divergent flaps/
by: Leavitt, Laurence D.
Published: (1982)

Perfect bell nozzle parametric and optimization curves/
by: Tuttle, J. L.
Published: (1983)

Static internal performance characteristics of two thrust-reverser concepts for axisymmetric nozzles/
by: Leavitt, Laurence D.
Published: (1982)

Cannot write session to /tmp/vufind_sessions/sess_r3ndug082uh50hosrujlnbfe72