Cover Image

Venturi nozzle effects on fuel drop size and nitrogen oxide emissions/

Main Author:	Johnson, Susan M. 1952-
Corporate Authors:	United States National Aeronautics and Space Administration Scientific and Technical Information Branch, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, Lewis Research Center
Format:	Book
Language:	English
Published:	Washington: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1982
Series:	NASA technical paper 2028
Subjects:	Venturi tubes Nozzles Airplanes > Jet propulsion

Similar Items

Internal performance of two nozzles utilizing gimbal concepts for thrust vectoring/
by: Berrier, Bobby L.
Published: (1990)

Effect of a trade between boattail angle and wedge size on the performance of a nonaxisymmetric wedge nozzle/
by: Carson, George T.
Published: (1987)

Operation and performance measurement on engines in sea level test facilities
Published: (1984)

Effects of nozzle interfairing modifications on longitudinal aerodynamic characteristics of a twin-jet, variable-wing-sweep fighter model/
by: Reubush, David E.
Published: (1975)

Aeropropulsive characteristics of canted twin pitch-vectoring nozzles at Mach 0.20 to 1.20/
by: Capone, Francis J.
Published: (1991)

Crossflow in two-dimensional asymmetric nozzles/
by: Sebacher, Daniel I.
Published: (1975)

Boundary-layer separation on isolated boattail nozzles/
by: Abeyounis, William Kelly
Published: (1978)

Experimental and analytical investigation of a nonaxisymmetric and wedge nozzle at static conditions/
by: Carson, George T.
Published: (1978)

Effect of tail size reductions on longitudinal aerodynamic characteristics of a three-surface F-15 model with nonaxisymmetric nozzles/
by: Frassinelli, Mark C.
Published: (1990)

Static internal performance of a two-dimensional convergent-divergent nozzle with thrust vectoring/
by: Bare, E. Ann
Published: (1987)

Parametric experimental investigation of a scramjet nozzle at Mach 6 with freon and argon or air used for exhaust simulation/
by: Cubbage, James M.
Published: (1991)

Aeropulsive characteristics at Mach numbers up to 2.2 of axisymmetric and nonaxisymmetric nozzles installed on an F-18 model/
by: Capone, Francis J.
Published: (1982)

Aeropropulsive characteristics of nonaxisymmetric-nozzle thrust reversers at Mach numbers from 0 to 1.20/
by: Carson, George T.
Published: (1984)

A finite-difference analysis of the nozzle starting process in an expansion tunnel/
by: Weilmuenster, K. James
Published: (1975)

Aeronautical propulsion : the proceedings of a conference held at Lewis Research Center in Cleveland, Ohio, on May 13 and 14, 1975 /
Published: (1975)

Jet aircraft power systems/
by: Casamassa, Jack V.
Published: (1965)

Experimental investigation of a 0.15-scale model of an underfuselage normal-shock inlet/
by: Leamer, P. C.
Published: (1978)

Aerospace propulsion /
by: Lee, T.-W.

Effect of nozzle and vertical-tail variables on the performance of a three-surface F-15 model at transonic Mach numbers
by: Pendergraft, Odis C.
Published: (1982)

Hot-flow tests of a series of 10-percent-scale turbofan forced mixing nozzles/
by: Head, Verlon L.
Published: (1984)

Optimizing jet transport efficiency : performance, operations, and economics /
by: Padilla, Carlos E.
Published: (1996)

Aircraft propulsion /
by: Farokhi, Saeed,

The effects on propulsion-induced aerodynamic forces of vectoring a partial-span rectangular jet at mach numbers from 0.40 to 1.20/
by: Capone, Francis J.
Published: (1975)

Static and wind-on tests of an upper-surface-blown jet-flap nozzle arrangement for use on the Quiet Clean Shore-haul Experimental Engine (QCSEE)/
by: Phelps, Arthur E.
Published: (1977)

Effects of sidewall geometry on the installed performance of nonaxisymmetric convergent-divergent exhaust nozzles/
by: Yetter, Jeffery A.
Published: (1980)

Jet, rocket, nuclear, ion and electric propulsion: theory and design/
by: Loh, Wellington Hsiao-Tung, 1917-
Published: (1968)

Jet engines : fundamentals of theory, design and operation /
by: Hunecke, Klause
Published: (1997)

Exploratory study of transient unstart phenomena in a three-dimensional fixed-geometry scramjet engine/
by: Wieting, Allan R.
Published: (1976)

Aerodynamic and directional acoustic performance of a scoop inlet/
by: Abbott, John M.
Published: (1977)

Performance of twin-dimensional wedge nozzles including thrust vectoring and reversing effects at speeds up to Mach 2.20/
by: Capone, Francis J.
Published: (1977)

Dell' avvocato Giammaria Venturi reggiano notizie biografiche e letterarie

Ignition of SiH4-H2-O2-N2 behind reflected shock waves/
by: McLain, Allen G.
Published: (1983)

Static and wind tunnel near-field/far-field jet noise measurements from model scale single-flow baseline and suppressor nozzles
by: Jaeck, Carl L.
Published: (1977)

Static investigation of a two-dimensional convergent-divergent exhaust nozzle with multiaxis thrust-vectoring capability/
by: Taylor, John G.
Published: (1990)

Numerical method for predicting flow characteristics and performance of nonaxisymmetric nozzles : theory /
by: Thomas, P. D. 1935-
Published: (1979)

Fuselage and nozzle pressure distributions of a 1/12-scale f-15 propulsion model at transonic speeds : effect of fuselage modifications and nozzle variables /
by: Pendergraft, Odis C.
Published: (1984)

Performance of an isolated two-dimensional variable-geometry wedge nozzle with translating shroud and collapsing wedge at speeds up to mach 2.01/
by: Maiden, Donald L.
Published: (1975)

Wind tunnel performance tests of coannular plug nozzles/
Published: (1978)

Aeropropulsive characteristics of isolated combined turbojet/ramjet nozzles at Mach numbers from 0 to 1.20/
by: Carson, George T.
Published: (1988)

Introduction to aerospace propulsion /
by: Archer, R. Douglas.
Published: (1996)

Cannot write session to /tmp/vufind_sessions/sess_9cahtu3h0upahh1dq16li5b9a3